Press the button to see which wireless zone (or zones) have not reported a signal to the alarm panel. One or more codepad lights will turn on to indicate which wireless sensors have a low battery. See trouble-shooting section below for more information One or more codepad lights will illuminate to indicate which of your sensors has a tamper alarm. The alarm system is drawing too much current. Here’s what they mean:ġ – Over-current fault. One or more zone lights on the codepad will light. Press 1 again to drill down to the exact fault.
To clear a Phone Line Failure on an GE Interlogix NX panel locally: If a local power cycle is not performed after making changes, the phone line failure message eventually appears again. Important: To ensure these settings take effect, it is required to perform a local power cycle of the panel after clearing the monitoring station information. If there is not a phone line attached to the panel and the monitoring station information is programmed in system programming, clear the monitoring station information using either the panel, Partner Portal, or MobileTech app.
If there is not a phone line attached to the panel, it is required to remove the monitoring station information programmed in the panel since the information is stored in the module instead.Has monitoring station information programmed into it but the panel does not have a phone line attached to it.Modified on: Tue, 15 Oct, 2019 at 11:36 AMĪ Phone Line Failure occurs if the GE Interlogix NetworX NX-8E panel either: Solution home GE Interlogix GE Interlogix NetworX NX-8E FAQ's GE Interlogix NetworX NX-8E: How to Clear a Phone Line Failure?
0 kommentar(er)
